Questions
How do I find out on which channel my controllers are currently
programmed?
Just count the slow flashing signals when switching on. The number corresponds to the channel
number
How do I check the battery condition?
In wireless operation, the LED flashes regularly. The LED flashes the more often the battery is
depleated. If it flashes about three times per second, the battery is slowly running down. Battery
operation - see: "Can rechargeable batteries be used?"\ The controller switches off at 1.8V.
Can rechargeable batteries be used?
When using rechargeable batteries, you should consider recharging already at one flash per second,
otherwise the batteries can be deeply discharged. The controller only switches off at 1.8V.
Is the battery required for cable operation?
In cable mode the controller power is supplied exclusively by the CU (power switch position to the
left). No battery is consumed. They could also be removed.
How do I see that the wireless operation is active?
In wireless mode, the controller flashes regularly. The frequency provides information about the
battery status. See "How do I check the battery status?".
How do I see that wired operation (cable mode) is active?
The LED only flashes once when the power is turned on (switch to the left). After that the LED is off.
Power is supplied exclusively from the Control Unit or the expansion box. The internal battery is
completely separated from the electronics.
Why does my controller react only after 2-3 seconds after switching on?
After switching on the wireless operation, the controller shows its channel number by flashing
signals. Only after this is it ready to start.
How do I wake up the controller from sleep mode (power save mode)?
In order to achieve this significant reduction in power consumption, it was necessary to stop
querying the throttle lever position in sleep mode. This means that only by pressing the switch
button the controller wakes up again.
Alternatively the controller can be switched off and on again.
Subject to technical changes - status december 2020
