background image

 

 

 

 

 

EN 

2

21 

REMOTE CONTROL (OPTIONAL) 

The appliance can be controlled using a remote control 
powered by a 1.5 V carbon-zinc alkaline batteries of the 
standard LR03-AAA type (not included). 
•  Do not place the remote control near to heat sources. 
• Used batteries must be disposed of in the proper 

manner. 

 

 

 

Remote control panel 

 

 

 

 

 

 

 

Motor

 

 

Door Closed: Opens the door, turns the motor on at the last speed set and 
turns the lights on. 

 

 

Door Open: press briefly to turn the Motor On/Off. 

 

 

Door Open: press for 2 seconds to turn the Motor and the main lights off 
and close the door. 

 

 

Decreases the working speed each time it is pressed. 

 

 

Increases the working speed each time it is pressed. 

 

Intensive Activates 

Intensive 

mode (activated with the door open). 

 

Delay/24H 

Press briefly to activate the Delay function. 

 

 

Pressed for 2 Seconds: Activates / Deactivates 24H mode (activated with 
the door open). 

 

Light 

 

Door Open: press briefly to turn the main lights On/Off. 

 

 

Door Open: press for 2 seconds to turn secondary lights On / Off. 

 
 

Summary of Contents for FSW 918 TC W BK XS-CH















Reviews: