EN
1
19
RECYCLING VERSION AIR OUTLET
To install the hood in recycling version, the optional charcoal
filter kit must be purchased.
• Remove the chimney angle bracket.
• Screw the filter cover onto the air outlet, using four screws
12c
(2.9 x 12.5).
• Fix the air outlet grid
8
on the recirculation air outlet using the
2 screws
12d
(2,9 x 9,5) provided.
16
12c
12d
8
ELECTRICAL CONNECTION
• Connect the hood to the mains supply.
• Open the upper panel by pressing the
A
-key (See Part “USE” )
for at least 2 seconds.
• Remove the metal filters (See Part “MAINTENANCE”) and
make sure that the connector piece of the supply cable is cor-
rectly inside the hood socket.
Chimney assembly
Upper exhaust Chimney
• Slightly widen the two sides of the upper chimney and hook
them behind the brackets
7.2.1
, making sure that they are well
seated.
• Secure the sides to the brackets using the 4 screws
12c
(2,9 x
9,5) supplied.
Lower exhaust Chimney
• Slightly widen the two sides of the chimney and hook them
between the upper chimney and the wall, making sure that they
are well seated.
• Fix the lower part laterally to the hood body using the 2 screws
12c
(2,9 x 9,5) supplied.
12c
2.1
2.2
2
7.2.1
12c
Summary of Contents for FSW 918 BK/XS
