L:\INFORM\CDFrifri\2006\frifri\English\Technic\Manuals\215122
31/01/2006 Page : 34/51
Elegance « M »
(1)
(4)
(5)
(2)
(2)
(2)
By switching “ON” of the control panel, the fryer goes
automatically into the FMC position.
. The yellow led (4) of parameter FMC is then switch on.
.
The display ( 5 ) shows alternatively the real temperature in
the vat and the setting of the FMC.
.
It is possible to adjust the setting between 60 and 90°C but
only in the programming mode.
If you do not wish to use the function FMC, you can select directly the requested frying temperature,
but
the fryer will continue the alternate heating phase (factory setting) to obtain a temperature equal to the
FMC setting.
.Afterwards
it will heat continuously to reach the selected frying temperature.
5.3 Selection of frying temperature, Elegance « S »
. Turn the rotary know (1) on the requested frying temperature
(ex :180°C).
. The yellow led (2) in the drop symbolizes the heating, the
temperature
control is in phase of work to reach its value in this
case 180°C.
. As soon as the
yellow led (2) in
the drop is off, the
oil is at the
selected
temperature and
you can start
frying
.
(1)
(2)
Summary of Contents for FRIFRI Elegance M
Page 51: ......
