Franke FMXO 86 M Instructions For Use And Installation Download

Page: 21 / 80

Turn the knobs to the off position. Touch any of the symbols to interrupt the acoustic signal and act on the
symbols for a few seconds to annul programming.

AUTOMATIC FUNCTIONING (WITH DEFERRED FIRING START SETTING)

Act on the

MODE

symbol until

DUR

(duration) appears alternating with the current time, both flashing (the

symbol also starts to flash). Act on the symbol to set the envisioned firing time duration. With

MODE

pass to

the

END

function, which flashes alternately with the firing end time calculated by the programmer on the basis

of the duration data inserted. Set the desired firing end time, by acting on the symbol. After a few seconds
the time re-appears and the letter

remains fixed. The kiln remains off and will re-activate automatically

(the symbol lights up), as set.
When the set time is reached, the acoustic signal indicates the end of firing, the letter

starts to flash and

the kiln switches off.
Turn the knobs to the off position. Touch any of the symbols to interrupt the acoustic signal and act on the
symbols for a few seconds to annul programming.
Example: it is 11:30, the firing time necessary is 30 minutes and firing must end at 13:00 by setting it in the
program. The kiln will switch on at 12:30 and switch off at 13:00.

TIMER FUNCTION

Act on the

MODE

symbol until the flashing symbol and

0:00

appears.

Set the desired time, using the symbol. After a few seconds the symbol stops flashing and the clock
returns. When the set time is reached, the symbol starts to flash again and the acoustic signal starts.
Touch any of the symbols indifferently to stop the acoustic signal.
After a few seconds, the clock will re-appear. Press the

MODE

symbol to annul this function.

This function can be used for manual firing.

ACOUSTIC SIGNAL

The acoustic signal starts to ring for 6 minutes, to interrupt it, act indifferently on one of the three symbols.
The intensity of the signal can be regulated on three different sound levels in the following way:

act

simultaneously on the symbols, act on the

MODE

symbol until

ton

appears, touch the symbol to

select the desired level.

DELETING THE PROGRAM

To delete a program set, act on the symbols to delete a program set, just act on the symbols
simultaneously. The programmer will return to the manual setting ready for new use.

SAFETY FOR CHILDREN OR AGAINST ACCIDENTAL CONTACTS

It is an additional function that allows to block access to the functionality of the electronic programmer keys
both when the kiln is running and as prevention with the kiln is off.
When  activated,  this  function  prevent  children  or  other  persons  touching  the  programmer  symbols
accidentally, thus modifying the previous program or from starting the kiln.
Every  programmer  signal  that  intervenes  firing  kiln  functioning  when  the  safety  lock  is  activated  can  be
eliminated by acting on any of the keys. The safety lock will remain active.
The safety lock is activated automatically if, no symbol is pressed for about 8 seconds and is deactivated by
pressing the

MODE

symbol for more than 2 seconds or acting on the symbols simultaneously.

NOTES:

- The lock must be deactivated to display the remaining firing time.

MANUAL PROGRAMMER: PUSH-PULL for Model MAM 82 M

MANUAL OPERATION:

Press the knob to raise it. Turn the knob anticlockwise to the

“Hand” manual

symbol. See figure 10.
IMPORTANT: If the knob is left on Manual mode and a cooking programme is selected, the oven stays on
continuously.

COOKING PROGRAMME OPERATION:

Turn the knob clockwise and select the required cooking time.

At the end of the cooking time the oven switches off automatically and a ringer sounds.

CHILD SAFETY FUNCTION (LOCK)

– when provided for

This additional function is used to lock the electronic programmer buttons, when the oven is operating and as
a preventive measure when it is off. It is shown by the special symbol (key).
When activated, this function prevents children or others from modifying the previously set programme or
switching on the oven, if off, by pressing the programmer buttons.