1T 310'177 Operating Manual
Ecolino
Erstellt: 01.05.2002 Rev.: C SL: 20'987 BJC
page 45
5. The Cash Card must be removed
remove card
6. If furhter Cash Cards are to be disabled, steps 4+5
insert card
must be repeated.
cash/load à
7. Insert the Load Card into the card reader
lock chip cards
perform "shift"
6.1.6.8 Change PIN code
1. Insert Load Card
2. Press the "+" or "-" key until the parameter is obtained
change pin-code
perform "shift"
3. Press the Shift key
pin-code 0000
"-/+" "shift" à
4. Digits are input with the "+" or "-" key. The next item is obtained using the Shift key.
5. After the input, the new PIN code is saved to the
change pin-code
Load Card
...done...
6.2 Coin Validator
6.2.1 General remarks
- Initial situation: The Ecopower is ready for operation.
- The cash system can run parallel to the coin validator.
- To grant function of coin validator the Ecopower must be switched on and the account system
has to be activated by the management card which is supplied along with the machine (see
chapter 6.1.5.2).
- Generally, two different prices can be adjusted with the coin validator.
- When switching off the Ecopower existing credits can get lost.
6.2.2 Selection of product
1. The display indicates
credit-mode
12:00 1.1.97
2. Insert coin into coin validator
price level 1
select product
3. Select product. The product will be supplied.
