– 31 –
CR 913 M
EN
Cleaning the side frames and telescopic
guides
To clean the side frames and telescopic guides
thoroughly they can be removed from the oven.
Remove the telescopic guides
1
2
2
3
3
A
B
3
1
Image A
X
X
With the telescopic guide in closed position press
down firmly (1) to the middle of the wire rack where
the bottom side of the guide hooks.
X
X
Turn the guide in a anticlockwise direction (2) and
remove it from the grid floor (3).
Image B
X
X
With the telescopic guide in open position, move
forward the wire rack (1).
X
X
Turn the guide in a clockwise direction (2) and hook
it on the bottom shelf (3) pressing towards of the two
hooks until you hear a click.
X
X
Lift the telescopic guide (3) while pulling out (2)
towards the other side of the oven.
X
X
Remove the telescopic guides.
Remove the side frames
1
2
3
X
X
Bend the crosspiece which is engaged in the fixing
bush downwards and remove it from the groove.
X
X
Push the side frame upwards and remove it from the
two upper hooks.
Cleaning
X
X
Clean the side frames and the telescopic guides.
X
X
After cleaning, keep the side frame tilted and insert the
side frames into the two respective guides on the top.
X
X
Bend the crosspiece which is engaged in the fixing
bush upwards and insert it in the groove.
X
X
Insert the telescopic guides.
Replacing the oven lamp
Franke ovens are equipped with two rectangular lamps.
The replacement lamp must meet the following technical
specifications:
– Temperature resistance: 300°C
– Voltage: 220-240 V, 50/60 Hz
– Power: 40 W
– Connection: G9
CAUTION! Damage to the lamp due to wrong
handling!
X
Z
Avoid touching the lamps with bare hands.
X
Z
Use a cloth or a sheet of kitchen paper.
WARNING! Possibility of electric shock!
X
Z
Ensure that the oven is switched off before replacing
the lamp.
WARNING! Electric shock due to wrong
handling!
X
Z
Switch the oven off.
– Depending on how the oven is installed: Unplug
the oven or disconnect the power at the main
electrical system switch, e.g., switch off the fuse of
the oven in the fuse box.
X
X
Remove the glass cover by carefully prying it off with a
flat-blade screwdriver.
X
X
Remove the lamp from its holder.
X
X
Replace the lamp.
X
X
Reattach the glass cover.
