27
11-03-2014 / LSC 178 / Rev. 00
400
T
6 ROUTINE APPLIANCE MAINTENANCE TO BE PERFORMED BY THE USER
Take note!
To grant the efficiency of the appliance and to maintain correct operation, it is necessary to follow the manufacturer’s instructions
as to cleaning and regular maintenance.
Attention!
Cleaning and routine maintenance operations must be carried out by the user according to the manufacturer’s instructions given here
below. Before performing any cleaning operation, make sure the machine is unplugged from the power supply. Cleaning and routine
maintenance operations must be carried out when the machine is cold and using protective gloves to prevent abrasions.
DAILY AT THE END OF THE JOB
1)
replacing the water in the boiler.
After turning off the appliance, replace the water in the boiler as follows:
• Place a container that can withstand high temperatures below the hot water spout (17) to prevent any hot water spills.
• Open, by rotating it anti-clockwise, move upwards the lever (3) up to the complete emptying of the boiler. Close the valve (3) and
switch the machine back on. The correct water level gets restored automatically in the boiler.
2)
Then clean the filter holders and the filters with the brush provided, making sure no dirt is left inside the filter holders and that all filter
holes are clean.
3)
Clean the shower heads below the delivery groups with the brush.
4)
Clean the drip tray (10) and the cup grid (9), using the standard detergents available on the market, if necessary.
Summary of Contents for COMPACT T 400
Page 4: ...2 11 03 2014 LSC 178 Rev 00 400 T...
Page 33: ......
