1T 310'783 Operating Manual
Ecolino / Ecopower Milk System
Erstellt: 07.05.2002 Rev.: C SL: 20'987 BJC
page 37
6.1.5.1 Handling of the Management Card
If the Management Card has not yet been assigned to the Ecolino (setting made at the factory), you
will be requested to input the installation number when you first insert the Management Card into the
chip card reader. The installation number appears on the rating plate under the identification no.
During input, the Stop key is used to increase the number and the Clean key to reach the next digit
position. This input is no longer requested on subsequent use of the Management Card.
1. After insertion of the Management Card, the PIN code is scanned depending on the security level
pin-code 0000
"-/+" "shift"
2. Digits are entered with the "+" or "-" key. The next item is reached by pressing the Shift key.
3. Once the PIN code has been correctly entered, the user is taken into the Management level.
4. If the PIN code was incorrectly entered, the Management Card must be removed and reinserted.
Input of the PIN code can now be repeated from point 1.
6.1.5.2 Accounting mode YES/NO
The programmed accounting system can be enabled (YES) or disabled by means of this parameter.
In the event of errors in the accounting system, the setting can be programmed as NO, enabling
product selection to continue.
1. Insert Management Card into the card reader
2. Press the "+"/"-" key until the parameter is obtained
account modus
YES/NO
3. Enable or disable the accounting system using the
Shift key
4. Setting can be terminated by pressing the "+" or "-" key, after which the user returns to the
Management level.
6.1.5.3 Price switching
Two different prices can be input per product. The two phases can be switched according to time
by means of the price switching (day/night prices).
1. Insert the Management Card into the card reader
2. Press the "+" or "-" key until the parameter is obtained
shift price
perform "shift"
3. Press the Shift key
price 1 00:00
4. Make the desired hours setting of the switching time
for price 1 using the "+" and "-" keys
5. Press the Shift key
price 1 00:00
