Franke ARTH101, Installation And Operating Instructions Manual, Page: 5 / 20

5
18
-05
.6
3
3
b
-G
B.f
m
5. Application
Height adjuster for hair dryer for application in semi-public as well as public commercial
facilities.
Continuously variable with constant-tension coiled-strip spring, guide rail made of
anodized special aluminium, with 4 mm full-surface glued crystal mirror and concealed
vandal-proof cable routing.
6. Technical Specifications
7. Scope of Delivery
8. Dimensions
9. Installing the Height Adjuster
Warning!
• The height adjuster for hair dryers must be fastened outside of the range of persons
using a bath or shower.
• Connect the height adjuster to the protective earth conductor system.
• The electrical connection is to be customer-provided with a suitable earth leakage
circuit breaker (RCD) for a maximum nominal fault current of 30 mA.
• The cross section of the electric line must be dimensioned by an electrical specialist
on site.
Failure to observe can mean risk of death or material damage, e.g. from electric shock or
fire.
Operating voltage: 230 V ~ / 50 Hz
Protection class:
I
Height adjustment
capability: 600 mm continuous
Quantity Description
1 Height adjuster
1 Attachment set
1 Installation and Operating Instructions