FRANCO srl Manual of use and maintenance AP
9
1.7 Applications
In the industrial and civil field,
the machine is installed in places where it is necessary to raise the temperature
using heated water from industry processes or from boiler-house, or where is necessary to lower the
temperature using cold water from pit or chiller.
It is used in shopping malls, workshops, showrooms, gyms, dairy industries, etc…
In the animal husbandry
the machine is used in pig factory to heat growing-finishing rooms, weaning rooms or
nursery rooms. It is used in corridors or poultry farms, in longitudinal ventilation tunnels, natural ventilation or
chimney ventilation.
In agriculture
it is used to heat or to cool mushrooms or greenhouses.
The materials used in building the machine ensure reliability and durability in time.
The exchanger is built in copper pipe and aluminium fins, coated in cataphoresis(an anti-corrosion treatment).
The bodywork is made in polypropylene, which has a low specific gravity and an high chemical resistance (acid
corrosion) an mechanical traction.
The fan on AP series are axial-type single-phase (with wired condenser) with 4 or 6 poles, IP 54 protection
degree (AP15 and AP25 are IP44). The fan motor are class F insulation with auto-reset thermal protection.
The arts of the humidifier are made in PA PC and ABS, the screws are stainless steel made.
Fasteners are in stainless steel
This device must be used only for the functions
for which it was intended and designed:
"Heating/Cooling working with hot/cold water”.
Any other use is to be considered improper and dangerous.
1.8 Versions
The AP series aerotherms are available in the following versions:
with louvers
without louvers
2408000
2408001
Version AP15 Thermal power 15kW - air flow 2.500m³/h 230V 50Hz
2408010
2408011
Version AP25 Thermal power 25kW - air flow 2.500m³/h 230V 50Hz
2408020
2408021
Version AP30 Thermal power 30kW - air flow 3.500m³/h 230V 50Hz
2408030
2408031
Version AP35 Thermal power 35kW - air flow 5.000m³/h 230V 50Hz
2408040
2408041
Version AP40 Thermal power 40kW - air flow 6.500m³/h 230V 50Hz
2408050
2408051
Version AP50 Thermal power 50kW - air flow 3.500m³/h 230V 50Hz
2408060
2408061
Version AP60 Thermal power 60kW - air flow 5.000m³/h 230V 50Hz
2408070
2408071
Version AP70 Thermal power 70kW - air flow 6.500m³/h 230V 50Hz
2408080
2408081
Version AP80 Thermal power 80kW - air flow 5.000m³/h 230V 50Hz
2408090
2408091
Version AP100 Thermal power 100kW- air flow 6.500m³/h 230V 50Hz
1.9 Identification and data label of the unit
Each machine is identified by the CE plate on which, indelibly set, is reference data of the device itself.
In any communication, either with the manufacturer or with the customer service, always cite these references.
Fig.1.2
The label plate positioning may vary from one device to another.
