2-0 REGULATIONS
The installation of an oil fired appliance must be carried out by a technically competent
person, experienced in both solid fuel and oil fired installation and capable of installing,
commissioning and servicing to the current requirements of the relevant local building
regulations.
In England and Wales these are J 1-2-3 Provision for introduction of air supply and discharge
of products of combustion.
Provision for protection against fire and heat.
In Scotland Part F sec 3.
In Northern Ireland Part L.
In Ireland Part J.
British IEEE is wiring regulations, latest edition.
Codes of practice which apply in the UK are -:
B55410, installation of oil fired space heating and hot water supply Part 1, boilers of rated
output not exceeding 44KW
B54543, Specification for chimney for oil fired appliances Part 3.
B55449 central heating for domestic premises Part 1 Forced circulation hot water systems.
BS 5601, B58303 & B56461 Pts 1 & 2 1984,
B57566 Parts 1 to 4
The installer should have passed the OFTEC course OFT 101 or attended specialist training
available at this company.
Failure to comply with the relevant requirements listed above can be hazardous and could
lead to prosecution under the law.
If you have any difficulties please phone our sales department on
Telephone: 01302 742520. (3 lines.)
INTRODUCTION
1.The Colibri is an oil fired, free standing central heating boiler, powered by a natural draft
vaporising pot burner.
2.It can be supplied with a built in presure vessel for unvented installation.
3.It has a cast iron hot plate which can be used for slow cooking.
4.It is operated by an automatic thermostaticaly controled oil valve with a built in safety cut
out.
5.It can be flued verticaly or horizontaly.
6.There is a lightweight hot plate cover which can only be used as it was intended on rear flue
installations.
7.On top flue installations the cover will not hinge and stay in a vertical position.
8.The appliance is manualy ignited and must not be operated without the lighting port bung
fitted.
9.Before installation of a Colibri boiler you must make absolutely sure that the chimney does
not have a history of downdraughting either intermittent or permanent, see figs 11 and 12.
MATERIALS REQUIRED
1. 125mm dia chimney liner for Colibri 14, 150mm dia chimney liner for Colibri 21.
2. Suitable anti downdraft terminal.
3. Suitable appliance adapter.
4. Suitable Copex vit adapter
5. Oil isolation valve
6. KBB remote sensing firevalve.
7. Boiler unions.
8. lOmm kutalex copper tube.
9. 22mm waste pipe (for wall sleeving.
Summary of Contents for COLIBRI 971.14.11.Z
Page 13: ...COLIBRI REF 971 14 11 Z 971 21 11 Z Fig 6 Diagram for Parts List...
Page 14: ...COLIBRI REF 971 14 11 Z 971 21 11 Z Fig 8 Fig 9 Fig 10 C C R S S V3V V E...
Page 15: ...COLIBRI REF 971 14 11 Z 971 21 11 Z Fig 11 Fig 12 Fig 13 Fig 14...
Page 16: ...COLIBRI REF 971 14 11 Z 971 21 11 Z Fig 15 Fig 16 Fig 17 Fig 19...
