FBUS ADDRESS SWITCHES
OVERVIEW
SETTING LAMP ADDRESS VALUE
The lamp address is set with the address switches using simple binary input.
Each
switch has a binary value as details below; -
SWITCH 10 = 1
SWITCH 9 = 2
SWITCH 8 = 4
SWITCH 7 = 8
SWITCH 6 = 16
The address value is the sum of the numbers above which are active when
the switch is on. For example, if switches 6 and 8 are on, and all others are
off, the address value would be 5. Note that switches 1-3 are not used for
address selection and should be switched off.
STANDARD CONTROL PANEL
– LAMP ADDRESS
SWITCH NUMBER
VALUE
SWITCH 1
16
SWITCH 2
8
SWITCH 3
4
SWITCH 4
2
SWITCH 5
1
STANDARD CONTROL PANEL
– PANEL ADDRESS
SWITCH NUMBER
VALUE
SWITCH 1
8
SWITCH 2
4
SWITCH 3
2
SWITCH 4
1
Switching a switch to on, adds the binary value relating to that switch to the
address value. With all switches off the value is zero.
