6
7. FIRST COMMISSIONING
READ CAREFULLY
Before the first commissioning of the RF module curtain, check the following points:
•
Did you not leave a tool or other object in the unit that could damage it?
•
The power supply corresponding to the required value and water heating is necessary?
•
Did you close the curtain properly?
Read the following instructions carefully before connecting the curtain.
8. CONTROLS
8.1 DESCRIPTION OF THE REGULATION AND ITS CONTROLS
Air curtain without heating:
Turn on the curtain by pressing the
button on the remote control. As a result, you can use the speed button to increase
or
decrease
the ventilation speed. The selected degree is indicated by the illuminated LEDs on the integrated control panel. To
turn off the curtain, press the
button.
Air curtain with electric heating:
Turn on the curtain by pressing the
button on the remote control. As a result, you can use the speed button to increase
or
decrease
the ventilation speed. Use the
button to select whether to switch the heating on or off. The operation of the fan
and heater is indicated by the LEDs on the integrated control panel. To turn off the curtain, press the
button. One time turns the
curtain off, activates a cooling function automatically and cools the electric heater for 30 seconds, then automatically turns off. The
cooling of the current electric heating is indicated by a flashing speed 1 on the integrated panel.
Programming (pairing):
This function is activated 30 seconds after the curtain is turned on (if the curtain was not connected to the front main power sup-
ply). Simultaneously press all four buttons on the control and hold for at least 4 seconds. If the fan 1 and fan 2 speed LEDs flash
simultaneously, the units are well paired. On the contrary, if the LEDs flash one after the other, the control is already paired or the
control limit has been reached (maximum 60 curtains per remote control). This function is activated 30 seconds after the curtain
has just been turned on (if the curtain was not connected to the main power supply before).
Unpairing:
This function is activated 30 seconds after the curtain has just been turned on (if the curtain was not connected to the main
power supply before). Simultaneously press the
buttons and hold for at least 4 seconds. If fan 1 and fan 2 speed LEDs
flash simultaneously,
the units are connected. On the contrary, if the LEDs flash one after
the other, the control was not linked to the electronic system, and therefore it is not necessary to unpair them.
ON/OFF
ON/OFF
ON/OFF
