7
8. CONTROLS
9. MAINTENANCE
START
A - Simultaneously press all buttons and hold for at least 4 seconds.
B - The control was not linked to the electronic system and there is still available memory space in the system.
C - The linking is done!
X - Simultaneously press the
buttons and hold for at least 4 seconds.
Y - Control already linked?
Z - The clearing is done!
8.2 MALFUNCTION STATUS
In case of servicing on the curtain, it is necessary to disconnect it from the main power supply line; if you have any doubts
about this approach, never proceed with the repair and call the professional service!!!
Behaviour of the unit
Presumed problem
Solution
The unit does not work
The curtain is disconnected
from the main power supply
Check the main power supply to the curtain.
Remote control does not
work
The air curtain does not
receive any control signal from
the remote control.
Check if the batteries are dead.
Check the polarity of the batteries in the remote control.
Check if the remote control is too far from the curtain and if there is
any signal intervention.
The heating switches off
spontaneously
The heater is overheated
The electric heater overheats because the air flow is not sufficient.
Check that the fans are running at maximum speed and if the air
flow supplying the curtain is blocked.
CAUTION!
Before any operations inside curtain, the power cable must be disconnected. It is necessary to leave the curtain on for a while to
cool down.
9.1 CLEANING
CAUTION!
•
It is prohibited to clean the unit with compressed air, aggressive chemicals, thinners or water.
•
To clean the suction cover, use a fine brush or vacuum cleaner.
•
Clean the unit using a wet cloth and non-aggressive cleaning products. Observe the safety rules.
YES
YES
NO
NO
1
A
C
X
Y
Z
B
