8.
Tighten the M5x32 screws.
Note:
Do not overtighten the screws. If you overtighten the screws, the lock
latch gets stuck.
9.
Tighten the set screw on the inside handle. The resistance increases steadily until the
screw pierces the spindle.
Note:
In the final position, the head of the set screw is level with the handle
surface.
6.3 The lock latch is stiff or gets stuck
Condition:
The lock latch gets stuck in either the extended or retracted position.
Framery O VCR Troubleshooting instructions
[email protected]
89
