Framery 2Q Huddle
10.6 Finalize the installation of the front frames and glasses
1.
Tighten the nylon screws (2 pcs each side) on the sides of the front half of the pod with
a flat-head screwdriver.
Note:
The glass adjustment screws are only for pushing the glasses together.
Tighten the screws until you feel resistance. Do not overtighten.
2.
Seal the side glasses with wedge-shaped seal between the glasses and frames.
Note:
Install the seal on the inside of the front half of the pod.
Tip:
Use glass washing liquid as a lubricant to help install the seal.
Installation instructions
[email protected]
89
