Frama Matrix F2
32
7. Frama Matrix F2 printing system
Your Frama Matrix F2 utilizes so-called inkjet cassettes to frank your mail items. The colour cartrige
also contains the printing head. With this in mind, handle the inkjet cassette very carefully and make
sure that no pointed objects, such as paperclips, etc. can damage the sensitive surface of the printing
head. ( Take care not to frank over staples etc, inside envelopes).
7.1. Changing inkjet cassette
If you wish to change your inkjet cassette, press “i” in the
franking page.
1.
Press the key “Printer Settings”.
2.
Press “Change Cassette“ and acknowledge your
intention by pressing ENTER.
3.
Your Matrix F2 will now bring the inkjet cassette into the
removal position.
4.
Open the top cover flap. Remove the inkjet cassette by
squeezing together the grip surfaces on the cartridge
and pulling it out upwards.
Put in a new inkjet cassette. Make sure that you first remove the adhesive tape from the printing head.
Push the new inkjet cassette fully into its guide. Adhere to the instructions in chapter 3.1 to properly
adjust the inkjet cassette. You can repeat this process at any time if you go to the function “Prints
Alignment”.
7.2. Cleaning printing system
From time to time, it might become necessary for the
printing head jets to be cleaned.
Your Frama Matrix F2 provides a cleaning cycle for this
purpose.
Blocked jets are often the result of the main power supply
being switched off before the jets have properly sealed
themselves. With this in mind, please wait at least 30 seconds after franking the last mail item before
you unplug your Matrix F2 from the power supply.
All screens shown in this chapter are for reference only and may differ from
your local presentation.