49
Catalytic Walls *
Catalytic walls are located on the left and the right side of cavity under
the guides. Catalytic walls banish the bad smell and obtain the best
performance from the cooker. Catalytic walls also absorb oil residue
and clean your oven while it’s operating.
Removing the catalytic walls
In order to remove the catalytic walls; the guides must be pulled out.
As soon as the guides are pulled out, the catalytic walls will be released
automatically. The catalytic walls must be changed after 2-3 years.
Rack Positions *
It is important to place the wire grill into the oven properly. Do not allow wire rack to touch rear wall of the
oven. Rack positions are shown in the next figure. You may place a deep tray or a standard tray in the lower
and upper wire racks.
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the figure, first remove the lower, and then the
upper side from installation location. To install wire racks; reverse the procedure for removing wire rack
.
Changing the Oven Lamp
WARNING:
To avoid electric shock, ensure that the appliance circuit is open before changing the lamp.
(having circuit open means power is off)
First disconnect the power of appliance and ensure that appliance is cold.
Remove the glass protection by turning as indicated in the figure on the left side. If you have difficulty in
turning, then using plastic gloves will help you in turning.
Then remove the lamp by turning, install the new lamp with same specifications.
Reinstall glass protection, plug the power cable of appliance into electrical socket and complete replacement.
Now you can use your oven.
