52
Problem
Possible Cause
What to Do
Water dripping.
Water or steam may generate
under
certain
conditions
depending on the food being
cooked. This is not a fault of the
appliance.
Let the oven cool down and
than wipe dry with a dishcloth.
Steam coming out from a
crack on oven door.
Water remaining inside the
oven.
Oven does not heat.
Oven door is open.
Close the door and restart.
Oven controls not correctly
adjusted.
Read the section regarding
operation of the oven and reset
the oven.
Fuse tripped or circuit breaker
turned off.
Replace the fuse or reset the
circuit breaker. If this is repeating
frequently, call an electrician.
Smoke coming out during
operation.
When operating the oven for the
first time.
Smoke comes out from the heaters.
This is not a fault. After 2-3 cycles,
there will be no more smoke.
Food on heater.
Let the oven to cool down and
clean food residues from the
heater.
When operating the oven
burnt or plastic odor coming
out.
Plastic or other not heat resistant
accessories are being used inside
the oven.
At high temperatures, use
suitable glassware accessories.
Oven does not cook well.
Oven door is opened
frequently during cooking.
Do
not
open
oven
door
frequently, if the food you are
cooking does not require turning.
If you open the door frequently
internal temperature drops and
therefore cooking result will be
influenced.
Internal light is dim or
does not operate.
Foreign object covering the
lamp during cooking.
Clean internal surface of the
oven and check again.
Lamp might be failed.
Replace with a lamp with same
specifications.
HANDLING RULES
1.
Do not use the door and/or handle to carry or move the appliance.
2.
Carry out the movement and transportation in the original packaging.
3.
Pay maximum attention to the appliance while loading/unloading and handling.
4.
Make sure that the packaging is securely closed during handling and transportation.
5.
Protect from external factors (such as humidity, water, etc.) that may damage the packaging.
6.
Be careful not to damage the appliance due to bumps, crashes, drops, etc. while handling and transporting
and not to break or deform it during operation.