50
Rack Positions *
It is important to place the wire grill into the oven properly. Do not
allow wire rack to touch rear wall of the oven. Rack positions are
shown in the next figure. You may place a deep tray or a standard
tray in the lower and upper wire racks.
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the figure, first remove the lower, and then the
upper side from installation location. To install wire racks; reverse the procedure for removing wire rack
.
Changing the Oven Lamp
WARNING:
To avoid electric shock, ensure that the appliance circuit is open before changing the lamp.
(having circuit open means power is off)
First disconnect the power of appliance and ensure that appliance is cold.
Remove the glass protection by turning as indicated in the figure on the left side. If you have difficulty in
turning, then using plastic gloves will help you in turning.
Then remove the lamp by turning, install the new lamp with same specifications.
Reinstall glass protection, plug the power cable of appliance into electrical socket and complete replacement.
Now you can use your oven.
Using the Grill Deflector Sheet *
1.
A safety panel is designed to protect control panel and the buttons when the oven is in grill mode. (figure
26)
2.
Please use this safety panel in order to avoid the heat to damage control panel and the buttons when the
oven is grill mode.
WARNING:
Accessible parts may be hot when the grill in use. Young children should be kept away.
3.
Place the safety panel under control panel by opening the oven front cover glass. (figure 27)
4.
And then secure the safety panel in between oven and front cover by gently closing the cover. (figure 28)
5.
It is important for cooking to keep the cover open in specified distance when cooking in grill mode.
6.
Safety panel will provide an ideal cooking circumstance while protecting control panel and buttons.
WARNING:
If the cooker has the
“closed grill functioned”
option with thermostat, you can keep the oven
door closed during operation; in this case the grill deflector sheet will be unnecessary.