FRAM FDH-690RBG, Manual

Page: 5 / 49

4
2.
The cooker hoods should be placed at a distance of 65-75cm from the cooking surface for best effect.
3. Install the hook on a suitable place once the installation height is fixed, and keep it in line. The fixed
position of the inside chimney bracket is the place of chimney. See pic 2.
4. Install the expansion pipe and fixed with a cable tie. Then put the cooker hood on the hook. See pic 3.
5. Fix the outside chimney bracket on the outside chimney and be sure that the inside chimney can be
adjusted the height in it freely. Afterwards, install the chimney on the cooker hood and lift up
expansion pipe till it out of the wall through the hole on the wall. See Pic 4.
6. Adjust the height of the inside chimney to the position of the inside chimney bracket and fix on it with
screws, meanwhile, fix the outside chimney on the cooker hood body by screws. After adjusting the
position, fix the body with safety screws. Note: The two safety vents are positioned on the back
housing, with a vdiameter of 6mm. See Pic 5.