FRAM FDH-690RBG, Manual

Page: 4 / 49

3
•
When the cooker hood and appliances supplied with energy other than electricity are simultaneously in
operation, the negative pressure in the room must not exceed 4 Pa (4 x 10-5 bar).
•
Warning: Danger of fire. Do not store items on the cooking surfaces.
•
A steam cleaner is not to be used.
•
Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a
lid or a fire blanket.
Mounting of the V-Flap
If the cooker hood does not have an assembled V-flap 1, you should mount the half-parts to its body. The
images only show an example of how to mount the V-flap, because the outlet may vary according to
different models and configurations.
To mount the V-flap 1 you should:
•
Mount two half-parts 2 into the body 6.
•
The pin 3 should be top oriented.
•
The axis 4 should be inserted into the holes 5 on the body.
•
Repeat all the operations for the 2nd half-part.
Installation
If you have an outlet to the outside, your cooker hood can be connected as below picture by means of an
extraction duct (enamel, aluminum, flexible pipe or non-flammable material with an interior diameter of
150 mm).
1. Before installation, turn the unit off and unplug it from the outlet.
4. INSTALATION