FRAM FCM-915CR, Manual

Page: 11 / 27

10
BEFORE THE FIRST USE
Check that all accessories are complete and the unit is not damaged. Fill water into water tank to
the MAX level and brew water for several times without coffee powder, then discard the water.
Clean and dry all detachable parts thoroughly according to the section
“CLEANING AND
MAINTENANCE” .
USING YOUR COFFEE MAKER
1. Open the top cover and fill the water tank with drinking water. The water level should not exceed
MAX level as indicated on the water level gauge.
2. Place the funnel into the funnel support of coffee maker, make sure it is fit correctly, otherwise
the top cover cannot be closed in place appropriately. Place a filter or filter paper into the funnel.
3. Add coffee powder into the filter. Usually a cup of coffee needs a level spoon of coffee powder,
but you may adjust according to personal taste. Close the top cover completely.
4. Insert the glass carafe with lid closed onto the warming plate horizontally.
5.
Press “ON/OFF” button once, the ON/OFF indicator illuminates in blue, and the coffee maker
starts to brew regular coffee.
If you want to brew bold coffee, first press
“STRENGTH” button once, the “STRENGTH” indicator
illuminates in blue, then press “ON/OFF” button once, the ON/OFF indicator will illuminate in blue
and the coffee maker will start to brew bold coffee.
Note: To cancel the “STRENGTH” setting, press “STRENGTH” button again.
6. The brewing process can be interrupted by pressing ON/OFF button again anytime, and the
ON/OFF indicator will extinguish, indicating your coffee maker is shut off.
Note: You can take out carafe, pour and serve at any time. The appliance will stop dripping
automatically. But the time cannot exceed 30 seconds.
7. Remove out the carafe to serve when finish brewing (about one minute later after the coffee
stops dripping out.)
Note: The coffee you get will less than the water you have added, as some water is absorbed by
coffee ground and adhere to the plastic.
8. When finish brewing, keep the coffee maker be energized if you do not want to serve
immediately, the coffee can be kept warm on the warming plate, and the coffee maker will shut off
automatically after 40 minutes from the end of brewing process if it has not been manually
disconnected at the completion of brewing. For an optimum coffee taste, serve it just after brewing.
9. Always turn the coffee maker off and disconnect the power supply when not use. Note: Pay
attention to pour the coffee out, otherwise you may be hurt as the temperature of coffee just
finished is high.
5. USING THE APPLIANCE