![background image](http://html1.mh-extra.com/html/fram/fcd-v8t2b/fcd-v8t2b_manual_2326372030.webp)
29
•
The operating temperature of the dryer is +5°C to +35°C. If operated out of this temperature range, the
performance of the dryer will be affected negatively and the product will be damaged.
•
Be careful when carrying the product since it is heavy. Always wear safety gloves.
•
Always install the product should be placed against a wall.
•
The rear surface of the product should be placed against the wall.
•
When the product is placed on a stable surface, use a water level to check if it is fully stable. If not, adjust
the feet until it becomes steady. Repeat this process every time you relocate the product.
•
Do not place the dryer onto the power cable.
Connection to Water Outlet (with optional drain hose)
In products with a condenser unit, water accumulates in the water tank during the drying process. You must
empty the accumulated water after each drying process. Instead of periodically emptying the water tank,
you can also use the water drain hose provided with the product to directly drain the water outside.
Connecting the Water Discharge Hose
1.
Pull and take out the end of the hose at the back of the dryer. Do not use any tools to take out the
hose.
2.
Fit one end of the water discharge hose, which is provided with the product, to the slot from which
you have removed the hose.
3.
Fix the other end of the water discharge hose directly to the water outlet or sink.
ATTENTION:
The hose must be connected in a manner that it cannot be displaced. If the hose comes out
during water discharge, there might be flooding in your house.
IMPORTANT:
The water discharge house must be installed at a height of 80 cm maximum.
IMPORTANT:
The water discharge hose must not be bent between the outlet and the product, folded or
stepped over.
Adjusting the Feet
•
For the dryer to work with less noise and vibration, it must be stable and balanced on its feet. Adjust the
feed to ensure that the product is balanced.
•
Rotate the feet to the right and to the left until the dryer is even and stable.
IMPORTANT:
Never remove the adjustable feet.
Electrical Connection
ATTENTION:
There is risk of fire and electric shock.