28
•
Lint filters must be cleaned after each use as indicated in Cleaning the Lint Filter.
•
Lint filters must be dried after wet cleaning. Wet filters might cause malfunction during the drying
process.
•
Lint accumulation must not to be allowed around the tumble dryer (not applicable for appliances
intended to be vented to the exterior of the building)
IMPORTANT:
The clearance between the dryer and the floor should not be reduced with objects such as
carpets, wood or panel, otherwise, sufficient air intake cannot be ensured for the machine.
•
Do not install the dryer in rooms where there is risk of freezing. Freezing temperatures negatively affect
the
dryer’s
performance. Condensed water that freezes in the pump and hose may cause damage.
Installing on Top Of a Washing Machine
ATTENTION
: A washing machine cannot be placed on the dryer. Pay attention to the warnings below when
installing the dryer on a washing machine.
ATTENTION:
The dryer can only be placed on washing machines that have a same capacity and above
•
To use the dryer on the washing machine, a fixing part must be used between the two products. The
fixing part must be attached by an Authorized Service Provider.
•
When the dryer is placed on the washing machine, the total weight of these products may reach almost
150 kilograms (when loaded). Place the products on a solid floor that has a load bearing capacity!
Appropriate Installation Table for Washing Machine and Dryer
Dryer
Washing Machine
(Depth)
37-42 cm
42-45 cm
46-49 cm
50-56 cm
57-63 cm
52,5 cm
X
✓
✓
✓
✓
56 cm
X
X
✓
✓
✓
61 cm
X
X
X
✓
✓
64 cm
X
X
X
X
✓
In order to put the dryer machine onto the washing machine, a special stacking kit is required as
an optional extra. Please contact customer service to acquire. The assembly instruction will be
served together with the stacking kit.
•
Before contacting the local Authorized Service Provider for the installation of the dryer, check the
information in the user manual to make sure that the electrical installation and water outlet is suitable.
If they are not, call a qualified electrician and a plumber to have the necessary adjustments made.
•
It is the customer’s responsibility to prepare the dryer’s installation place, as well as the electricity and
wastewater installation. Before installation, check the dryer for damage. If damaged, do not have it
installed. Damaged products may endanger your health.
•
Install the dryer on a stable and flat surface.
•
Run the dryer in a dust-free environment where the air ventilation is good.
•
The clearance between the dryer and the floor should not be reduced with objects such as carpets, wood
or tape.
•
Do not block the ventilation grills found on the plinth of the tumble dryer.
•
The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the
opposite side of the tumble dryer, in such a way that blocks the full opening of the tumble dryer door.
•
Once the dryer has been installed, the connections must remain stable. When installing the dryer, make
sure that the rear surface is not leaning on anything (e.g. tap, socket).
4.
INSTALLATION