FSW 63
FSW63-14 Multilanguage 01/03/2016
45
Remote humidistat connections
Remote humidistat connection must be realised according with electric diagram.
Connections must be done according to the electric wiring diagram specifications.
START UP
PRE-START CHECK
It’s very important to keep ground wire longer than the others: in this way if the cable
is pulled, the ground wire is the last to be removed.
Since there’s no fixing device for the main supply, the power cable must be fixed with
cable ducts or similar. The cable duct must enter inside the machine through the
apposite holes.
Machine is not designed to be used by people (also children) whose physical,
sensory or mental capabilities are reduced. Also people without experience or
knowledge of the machine can’t use it.
People, described above, can use this machine only if there’s someone, responsable
of their safety, which watches them and gives them instruction regarding the use of
the machine.
Children must be watched in order to be sure they don't play with machine.
This machine is designed in order to be used by experienced users or trained in
shops, light industry and farms.
People without experiences can use this machine only for a commercial use.
Check that all power cables are correctly connected and all terminals are fastly fixed.
The voltage at the phase, must be the one indicated on the unit label ± 5%
tolerance. If this should not happen, please, contact our Factory.
Caution: before proceeding to start up, check that all the cover panel be located in
the proper position and locked with fastening screws.