45
8.5.2 Typical control profile applications
Profile 1 Describes the ideal control characteristic curve for all
·
consumer networks
where an
inductive
cos
φ
is called for.
Profile 2 Suitable for
·
consumer networks
where an average cos
φ
=1 is to be achieved.
Profile 3 Suitable for
·
consumer networks
where cos
φ
is close to 1 but overcorrection is to
be avoided.
Profile 4 Suitable for
·
consumer networks
, as described in Profile 1, but which have their own
generating facilities (e.g. CHP units) with permanent or frequent
feed-in
(regeneration) to the power supply network.
Profile 5 Suitable for
·
generating networks
, such as hydropower or wind turbines, where a
capacitive cos
φ
is called for.
More information is given in the
FRAKO Application Note
.
Figure 42 Control profiles
Key
Action
Control setting
Select profile Select profile
Set profile
–
Figure 43 Control profile parameters
Key
Action
Profile selection
(Save Yes/No)
Select
parameter
Select
parameter
Parameter selection
Back to parameter
selection
–
