FPS 3NC, Owner'S Manual

Page: 6 / 36

PRODUCT DESCRIPTION
Specifications
6
Specifications
Flow Rates
Parameter Description
Discharge Size 3" and 4": 125# ANSI discharge flange
Operating Temperature Maximum 104 °F (40 °C)
Pump Housing GG-15 (ASTM A48 class 25 equivalent) gray cast iron with epoxy paint coating
Impeller GGG-50 (ASTM A536 80-55-06 equivalent) grade ductile iron utilizing a two vane semi-
open, balanced, non-clog design
Motor 1750 RPM, Class F insulation, Continuous duty (104 °F maximum), Lower double row ball
bearing, AISI 420 SST shaft, 300 Series SST fasteners
Hardware 300 series stainless steel
Bearings Ball bearings
Shaft Seal Upper and Lower: Type 21, mechanical, spring loaded, rotating Silicon Carbide with nitrile
(NBR) bellows and stationary Silicon Carbide with nitrile (NBR) cup, additional exclusion
seal, seal-fail indication probe
Power Cord 30’ or 50’ 8 AWG stranded 4-conductor, oil- and water-resistant Type SOOW or SEOOW,
rated for 600 V, -40 °C to 90 °C (-40 °F to 194 °F)
Cooling Dielectric oil; liquid level being pumped should be above the top of the cast iron motor cover.
Dielectric oil quantity:
1 phase - 3 hp/5 hp = 3.16 L,
3 phase - 3hp/5 hp/3 phase = 3.13 L, 7.5 hp / 10 hp = 3.23 L
HP
3 NC Performance - Gallons/Liters per Minute at Height
10 ft (3 m) 20 ft (6 m) 30 ft (9.1 m) 40 ft (12.1 m) 50 ft (15.2 m) 60 ft (18.3 m)
3 475/1798 360/1363 230/871 85/322 - -
5 555/2101 470/1779 355/1344 235/890 95/360 -
HP
4 NC Performance - Gallons/Liters per Minute at Height
10 ft (3 m) 20 ft (6 m) 30 ft (9.1 m) 40 ft (12.1 m) 50 ft (15.2 m) 60 ft (18.3 m)
3 455/1722 330/1249 195/738 34/129 - -
5 545/2063 434/1643 309/1170 141/534 - -
7.5 - 495/1874 395/1495 240/908 94/356 -
10 - 610/2309 540/2044 430/1628 290/1098 100/379