background image

27

U32-2 FPI Direct Vent Gas Insert

WARRANTY

FPI fireplaces are designed with reliability and simplicity in mind. In addition, our internal Quality Assurance Team carefully
inspects each unit thoroughly before it leaves our door.  FPI  Fireplace Products  International Ltd. is pleased to extend this
limited lifetime warranty to the  original purchaser of a FPI Product.

The Warranty:  Lifetime
Covered under the agreement are the following  components: Combustion chamber, heat exchanger, burner tubes, logs, embers,
glass (thermal breakage) and all gold plating (against defective manufacture).

The above will be covered for parts and labour for the first five years and parts only thereafter. Electrical components such as
blowers, fan motor, switches, wiring, thermodiscs, remote control, thermopiles, thermocouples, pilot assemblies, and gas valves
are covered for one year from the date of purchase.

Conditions:
All installations must be performed by a qualified gas fitter and installed according to all applicable local and national codes. Also,
all service work must be carried out by a qualified gas service person who is recommended by the selling dealer. It is the
responsibility of the installer to ensure that the appliance is firing as per rating plate. Any part or parts of this unit which in our
judgement show evidence of such defect will be repaired or replaced at FPI's option, through an accredited distributor or agent
provided that the defective part be returned to the distributor or agent Transportation Prepaid, if requested.

Exclusions:
This limited Lifetime Warranty does not extend to or include paint, door or glass gasketing or trim.  It does not cover installation
and operational related problems such as over-firing, downdrafts or spillage caused by environmental conditions, nearby trees,
buildings, hilltops, mountains, inadequate venting or ventilation, excessive offsets, negative air pressures caused by insufficient
make up air, mechanical systems such as furnaces, fans, clothes dryers etc. The warranty does not extend to any part or parts
which show evidence of misuse or abuse, neglect, accident or lack of maintenance.

Products made by other manufacturers and used in conjunction with the operation of this appliance without authorization from
FPI, may nullify your warranty on this product.

FPI Fireplace Products International Ltd., shall in no event be liable for any special, indirect consequential damages of any nature
whatsoever which are in excess of the original purchase price of the product.  Any alteration to the unit which causes sooting or
carboning that results in damage to the exterior facia is not the responsibility of FPI Fireplace Products International Ltd.

Note: Warranty is not transferable.

Vent Components:
The venting components are under warranty from Simpson Dura-Vent Inc.

General:
It is essential that all submitted claims provide all of the necessary information including purchase date, serial #, type of unit and
part or parts requested.

Summary of Contents for U32-LP2





























Reviews: