background image

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD.  6988 Venture St., Delta, BC  Canada, V4G 1H4

918-011a

MODELS:   U32-NG2 Natural Gas   U32-LP2 Propane

WARNING:
Improper installation, adjustment, alteration, service or main-
tenance can cause injury or property damage. Refer to this
manual. For assistance or additional information consult an
authorized installer, service agency or the gas supplier.

FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapours and
liquids in the vicinity of this or any other appliance.

Installation and service must be performed by an authorized
installer, service agency or the gas supplier.

FOR YOUR SAFETY
What to do if you smell gas:

Do not try to light any appliance
Do not touch any electrical switch:
do not use any phone in your
building.
Immediately call your gas supplier
from a neighbour's phone. Follow
the gas supplier's instructions.
If you  cannot reach your gas
supplier, call the fire department.

U32 Gas Insert

10/08/03

Owners &

Installation Manual

Tested by:

Installer: Please complete the details on the back cover

and leave this manual with the homeowner.

Homeowner: Please keep these instructions for future reference.

www.regency-fire.com

www.hampton-fire.com

Summary of Contents for U32-LP2





























Reviews: