RLGD-100 REMOTE LASER GAS DETECTOR
v
3.
When charging the battery, if any unusual odor or smoke is emitted, fire or possible short circuit is
observed, unplug the charger cable immediately and remove the battery. Contact FPI or its authorized
service center for assistance.
4.
Do not charge or replace the battery in flammable or explosive atmospheres.
5.
Do not insert any metallic or flammable material into the charger socket.
3.
General Warnings
1.
No attempt should be made to repair the instrument or substitute its components by other than trained
personnel of FPI. Unauthorized action may impair intrinsic safety of the instrument or cause irreversible
damage to the instrument.
2.
Do use the shoulder strap and wrist strap to ease fatigue of the personnel who carrying the instrument for
continuous operation. Accidental fall may result in damage to the instrument or hurting operator in the
feet.
3.
An accidental fall or severe strike may cause damage to the LCD screen and leaking of corrosive/toxic
liquid. Do not touch, inhale and ensure no splash of the liquid into the eyes.
4.
Do not use any battery on the instrument other than the specified battery.
5.
Do not short circuit the terminals of the battery. Do not store the battery with metallic or flammable
materials.
6.
Do not try to disassemble or heat the battery, or cast the battery in fire. If the battery not properly
function, contact FPI or its authorized service center for assistance.
7.
If any liquid leak from the battery, do not touch, inhale and ensure no splash of the liquid into the eyes.
8.
Do not use any other than the specified AC adapter. Unplug the power cable when the battery charging
finished.
4.
General Notes
1.
When the instrument is not in use, power off and remove the battery.
2.
If the instrument is operated in the environment with strong electromagnetic interference or electronic
noise, the detection may not properly function.
3.
If the instrument is placed in the environment with high hydrogen sulfide or salinity, may shorten its life.
4.
Operating temperature of this instrument is -20 ~ +50ºC and relative humidity is 30-95%, not to use in
condensing environment.
