RLGD-100 REMOTE LASER GAS DETECTOR
17
NOTE: Set ‘offset’ = (1-100), the offset indicator is on, set ‘offset’ = 0, the offset indicator is off.
Restarting system will not change the offset value.
5.7.
Sound & Light
Scroll down to ‘Sound & Light’, press ‘ENTER’, then use
‘▲’ or ‘▼’ to select sound volume among mute, low,
medium and high. Press ‘ENTER’ to continue setting ‘Alarm LED’, tick the selections to Enable or Disable.
Press ‘ENTER’ to save the settings, or press ‘ESC’ to cancel.
Press ‘ENTER’ to enter
submenu
Press ‘▲’ or ‘▼’ to increase or
decrease volume
Press ‘▲’ or ‘▼’ to Enable or
Disable
Fig.5-7 Sound & Light Setting Menu
NOTE: if set ‘sound volume’ = mute, or disable ‘alarm LED’, no sound or light alarm
available when methane leak detected.
5.8.
Brightness
Scroll down to ‘Brightness’, press ‘ENTER’, then use
‘▲’or ‘▼’ to increase or derease the value. Press
‘ENTER’ to save the setting, or press ‘ESC’ to cancel.
