FPI P36-3 Zero Clearance Direct Vent Gas Fireplace
61
PALACE SERIES OPTIONS
THE WESTMINSTER FRONT INSTALLATION
7) For optional fan installation, see page 63.
8) For 2-panel & 3-panel door installation, see page 64-65.
2) Bend tabs located at the back of the Westminster Front upwards 90
degrees.
Bend tab
upwards 90
degrees.
Backside of front shown.
1) Install the hood to the Westminster Front by sliding the 4 cut-outs thru
the screws and tighten to secure.
Cut-out in Hood
3) Secure the bottom frame of the Front by loosening the inner screw
on the hinge brackets on both the left and right side of the firebox.
Slide frame in place and secure.
Left Side Shown
Hinge bracket on
bottom of firebox
4) Slide tabs into louver brackets located on the inside top of the firebox.
Westminster Front
frame
Westminster Front
5) Remove existing control switch box from under firebox by discon-
necting wires connected to the valve at TH-TH/TP terminals and
discard.
Wires connected to Valve.
Control Box
6) Connect the ON/OFF switch wires coming from the left side of the
Front to the valve, with black hooked up to the TH/TP terminal and red
hooked up to the TH terminal.
NOTE: If fan option is not used please see step (5) of optional fan
installation for placement of fan control box.
Valve
ON/OFF Switch Wires
Fan Control Box
Bracket inside
top of firebox.
Tabs
