Part No.16894 Rev. G March 2014
- 16 -
3000 Series Cabinets
SERVICING
Control Gear
BAIN-MARIE CABINETS
-
SERVICING
Location
The electrical control gear is located in
the top of the cabinet. Remove six
screws to remove the top plate.
The chassis has a light switch, a
thermostat, a thermometer and a
protective fuse.
The incoming mains cable is
terminated on a connecting block.
Lighting
BAIN-MARIE CABINETS
-
SERVICING
Caution
Do not service lights without isolating the cabinet from the mains supply.
Illumination
Illumination is provided by halogen lamp fittings,
mounted in the top of the cabinet.
These lamps provide both light and a degree of
heating.
Blown lamps can be replaced after opening the fitting.
Be sure to use the same wattage rating lamp.
The ceramic end connectors are also available as
spares, should they become faulty.
Test
Turn the power on and test lighting operation. If normal operation cannot be
restored, by replacing the lamp, call an electrician.