FP optimail 30, Installation Manual

Page: 4 / 32

optimail 30 Installation Guide 4
Safety tips
Please observe the following tips when installing and commissioning for your own
safety:
• Install and commission the optimail 30 according to the instructions in the present
manual.
• Check that the machine is complete and undamaged. Do not start operating the
optimail 30 if parts are damaged or missing. Please contact the Francotyp-Postalia
Service.
• Use only the power and modem cables provided or approved by Francotyp-
Postalia. Make sure that cables are not damaged.
• When you move the optimail 30 from a cold environment (i.e. below 50°F):
Wait at least 24 hours before connecting the optimail 30. The optimail 30 requires
this period to adapt to the ambient conditions.
• Connect the optimail 30 only to a grounded single-phase power socket. Make sure
your office power supply conforms to power requirements shown on the serial
number plate of the optimail 30.
• Make sure the socket for connecting the optimail 30 is close by and easily
accessible at all times.
• Do not remove any parts of the housing.
• Never cover the ventilation slots in the housing.
• We recommend to use only approved FP equipment and FP original parts.
The manufacturer FP has established reliability, safety and applicability.
The manufacturer cannot assess the reliability, safety and applicability for products
not approved by FP, and therefore not vouch for such products.
• If you are using an external Francotyp-Postalia communication device (Universal
Link Box) for optimail 30: carefully read the product information that came with the
Universal Link Box.
This Installation Guide exclusively describes the installation and commissioning
of the optimail 30 postage meter. Please read the Operator Manual for further
information about optimail 30.