Install the MaxiFeeder
The maxiFeeder should be installed at the position of feeder no. 1 and/or 4. If you install
the maxiFeeder on position 4, you cannot use position 2 and 3 for document feeders.
Install the maxiFeeder as follows:
Move the feeding plate of the maxiFeeder to the rear position.
1.
2.
Lift the paper feed rollers with the front edge of the maxiFeeder.
3.
Move the maxiFeeder forward until it hooks behind the frame axle.
4.
Connect the connector A to the socket B.
The maxiFeeder is auto-detected by the system when the system is switched on. This
makes it easy to switch over from the standard document feeder tray to the maxiFeeder
and vice versa.
To make use of a maxiFeeder it is not necessary to (re-)program the jobs.
2
English
13
| Page 13 | mrt-03-2014 01:58 | Installation
Summary of Contents for FPi 6600-2
Page 1: ......
