76
Foxwell OS100 Digital Oscilloscope User’s Guide_English Version_V1.00
Chapter 4 Application Example
Simple Measurement
Capturing a Single-Shot Signal
The Application of the X-Y
Taking Cursor Measurement
Arbitrary Waveform Generator
4.1 Simple Measurement
To acquire and display a signal, please do the steps as follows:
1. Connect signal to
CH1
by using probe
2.Click the button on toolbar or
“
Acquire -> Auto Setup
”
on menu.
The DSO set the vertical, horizontal, and triggers controls at the best status automatically. Also,
you can adjust the controls to meet your measurement to optimize the waveform display.
To measure the frequency and
“Vpp”
,you can do these steps as follows:
1.Click the
“
Measure->Horizontal->Frequency
”
button, the frequency of the signal display on
the bottom of the waveform interface.
2.Click the
“
Measure->Vertical->Peak-to-Peak
”
button, the
“
Vpp
”
of the signal will also
display on the bottom of the waveform interface.
To clear the measurement on the waveform interface, click the
“Measure->Clear Measure”
button.
