45
Foxwell OS100 Digital Oscilloscope User’s Guide_English Version_V1.00
CH1:
Select CH1 as trigger signal
CH2:
Select CH2 as trigger signal
CH3:
Select CH2 as trigger signal
CH4:
Select CH2 as trigger signal
Slope:
Set the slope to
Rising (+)
or
Falling (-)
.
Rising:
Trigger on rising edge
Falling:
Trigger on falling edge
The user can also change the trigger setting on trigger panel in sidebar.
Set Pulse Trigger
Pulse trigger occurs according to the width of pulse. The abnormal signals can be detected
through setting up the pulse width condition.
Mode:
Sweep:
Source:
PW Condition:
Pulse Width:
The Pulse Width adjust range is 10ns~10s. When the condition is met, it will trigger
and acquire the waveform.
