9
NT415 EPB Service Tool Manual_English_V1.01
IMPORTANT
Do not use solvents such as alcohol to clean keypad or display. Use a mild nonabrasive detergent
and a soft cotton cloth.
2.2 Accessory Descriptions
This section lists the accessories that go with the EPB service tool. If you find any of the following
items missing from your package, contact your local dealer for assistance.
1 User’s Guide - provides operation instructions for the usage of the EPB service tool.
2 USB Cable - provides connection between the EPB service tool and a computer to upgrade the
tool.
3 Memory Card - contains the EPB service tool’s operating software and applications.
IMPORTANT
Do not remove the memory card unless performing updates to the card.
4 Diagnostic Cable - provides connection between the EPB service tool and vehicle.
5 Nylon Carry Pouch - stores the EPB service tool and its accessories.
2.3 Technical Specifications
Display: Backlit, 480*272 TFT color display
Working Temperature: 0 to 60
℃
(32 to 140
℉
)
Storage Temperature: -20 to 70
℃
(-4 to 158
℉
)
Power Supply: 8-18V vehicle power, 12V AC/DC power, 3.3V USB power
Dimensions (L*W*H): 200*130*40mm
Gross Weight: 1.2Kg
Protocols: SAE J1850 (VPW and PWM), ISO 9141-2, ISO 14230-2 (KWP 2000), ISO 15765-4
(CAN)
3 Getting Started
This section describes how to provide power to the EPB service tool, provides brief introductions
of applications loaded on the EPB service tool and display screen layout and illustrates how to
input text and numbers with the EPB service tool.
3.1 Providing Power to EPB Service Tool
Before using the EPB service tool, make sure to provide power to the EPB service tool.
The unit operates on any of the following sources:
●
12-volt vehicle power
●
USB connection to personal computer
3.1.1 Connecting to Vehicle Power
The EPB service tool normally powers on whenever it is connected to the data link connector
(DLC).
To connect to vehicle power:
1.
Locate the data link connector (DLC). The DLC is generally located under the dash on the
driver side of the vehicle.
2.
Attached the diagnostic cable to the EPB service tool and tighten the captive screws to ensure
good connection.
