15
NT415 EPB Service Tool Manual_English_V1.01
Figure 4-7 Sample No Fault Screen
4.2.2 Erase Codes
Erase Codes menu lets you to clear all current and stored DTCs from the control module. Also it
erases all temporary ECU information, so make sure that the selected system are completely
checked and serviced by technicians and no vital information will be lost before clearing codes.
NOTE
●
To clear codes, make sure that the ignition key is switched to ON with the engine off.
●
Erase Codes does not fix the problem that caused the fault! DTCs should only be erased after
correcting the condition(s) that caused them.
To clear codes:
1.
Scroll with the arrow keys to highlight Erase Codes from Diag. Menu and press the ENTER
key.
Figure 4-8 Sample Function Menu Screen
2.
Follow the on-screen instructions and answer questions about the vehicle being tested to enter
into next screen.
