Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00
13
Figure 4-4 Sample Read Codes Screen
3.
A code list including code number and its description displays.
Figure 4-5 Sample DTC Description Screen
NOTE
If no DTCs are present, the message “No (Pending) Codes Found!” is displayed. If any
manufacturer specific or enhanced codes detected, F1000B reads the correct DTC information
automatically according to the VIN.
4.2 Erase Codes
Erase Codes menu lets you to clear all current and stored DTCs from the control module. Also it
erases all temporary ECU information, including freeze frame. So make sure that the selected
system are completely checked and serviced by technicians and no vital information will be lost
before clearing codes.
There are two ways to erase codes:
● Press the
Erase
hot key to erase codes from home screen.
● Traditional way: select Erase Codes from the diagnostic menu.
NOTE
●
To clear codes, make sure that the ignition key is switched to ON with the engine off.
●
Erase Codes does not fix the problem that caused the fault! DTCs should only be erased after
correcting the condition(s) that caused them.
To clear codes:
1.
Press the
Erase
hot key to directly erase the codes from the home menu. Or use the
UP/DOWN
key to highlight
Erase Codes
from Diagnostic Menu and press the
ENTER
key.
