DPT701 Digital Pressure Tester User’s Guide_English Version_V2.00
9
2.2 Accessory Descriptions
This section lists the accessories that go with the tester. If you find any of the following items
missing from your package, contact your local dealer for assistance.
1 User’s Guide
2 80 Bar Sensor
3 Wireless PC receiver
4 Spare Fuse
5 2X2 Diagnostic Adapter
6 CD
7 Sealant
8 Blower Molding Case
9
Bluetooth Adapter
2.3 Technical Specifications
Sensor type
: Strain gauge technology, amplified and digital temperature compression
Sensor output
: Ratiometric, 0.5/4.5 V DC at 5 V DC excitation
Sensor FS
.: 80 bar / 1160 psi
Resolution
: 0.1 bar / 1psi
Proof pressure
: 150% FS
Battery type
: 9V
Display
: Backlit 64x128 pixels graphic LCD
Data transmission interface
: wireless module
Adapters included
: 6mm and 8mm
Working Temperature
：
0 to 60
℃
(32 to 140
℉
)
Storage Temperature
：
-20 to 70
℃
(-4 to 158
℉
)
Dimensions
：
190*110*44mm
3 Getting Started
This section describes how to provide power to the tester and how to program the scanner to
meet your specific needs
3.1 Providing Power to Tester
Before using the tester, make sure to provide power to the tester.
The unit operates on 9-volt cell battery
3.1.1 Powered by Cell Battery
The scan tool receives power through a 9 volt cell battery which installed in the back of the tester.
To install the battery
1. Prepare a 9 volt lithium battery.
2. Install this battery in the back of the tester. Please pay attention to its positive pole and negative
pole.
3. Press the power switch of the tester to power it on.
3.1.2 Replace Battery(9V)
1.If the product does not go on or goes out repeatedly, the power supply battery might be too low.
2.To replace the battery, open the rear cover of the instrument to gain access to the battery
compartment. Replace the battery with a new 9-volt battery and replace the cover on the back of
the instrument.
