Operating Instructions
www.foxunhd.com
8.4 Video wall:
A 3x5(row x column) video wall setting example here for reference.In multicast and matrix application mode, access
the web user interface of correspondent receiver to setup.
8.4.1(Basic setup)
Please refer to “section 6.2.1 Basic setup” and follow the steps as below.
Step 1:set up the vertical monitor count to “3”
Step2:set up the horizontal monitor count to “5”
Step3:set up the row position of the monitor to “0”
Step4:set up the column of the monitor to 0
Step5:Apply the setting to extender system
Administrator can complete each extender position setting after follow 5 steps in above.and then follow the above
steps to set the other extenders to the rest of row and column positions from 0x1,0x2,0x3 to 3x5
After the basic setup of the video wall,please access the advanced setup to proceed other detailed setting of the video
output.
8.4.2 Advanced setup
Select the monitor you want to control.the one select will show “This” in green in video wall matrix layout. Take
below diagram for example, the monitor we select to control here is the monitor in the upper left corner.
