1. Front panel control
There are four groups of LEDs for each output port. The LED lit on the position means that the output
port selects this input as its source.For eg.”5-8” led lit,means output5 is selecting input8 source.
4. RS232 remote control.
1. The Message Window
3. IR extension control
User can use the IR receiver cable to change the IR receive r position.
If controlling the HDMI matrix by remote control , connect the IR cable
matrix rear IR Ext socket. (1/8” (3.5 mm) input jack).
2. Local IR remote control
User can control the HDMI route of the matrix by using the IR remote.
There are two group key pads for sixteen ports.
Press the desired output source button, then press desired input button.
In 7,LCD will display “8-7”)
Operation
1-1
5-5
2-2
6-6
3-3
7-7
4-4
8-8D
D/S
5
directly to the
Out 8,then press
(Connect the computer and R232 Port 1 by RS232 Cable)
Summary of Contents for SX-MX88-3DCAT
Page 13: ...13 2...
Page 14: ...14...
