3.4 TCP control
For
Seeker-40
with Ethernet output, the default IP address is: 192.168.2.119,
control port: 2000. You can send the corresponding protocol to realize TCP
control after connecting.
The TCP control protocol is [Frame header: EB + command ID: 90 + data body
(serial port protocol) + Checksum (CS = body checksum, checksum is calculated
as a sum of all bytes of data body modulo 256)]. Or directly use
Seeker-40
software
to control
with
TCP connection.
ETHERNET
PC
Wiring Diagram
Seeker-40 TIR Dual-Sensor AI Tracking Camera User Manual
@2022 FOXTECH All Rights Reserved 18
