3.3 S.BUS Control
Control the gimbal camera functions by one combining signals. Connect the
external S.Bus to S.Bus port on the control box, and the external S.bus signal GND
connect to the GND interface of the control box.
Wiring Diagram (Take Futaba remote control for example):
Diagram of USB to TTL Cable:
Connect the camera to the upper computer by USB to TTL cable (Adopt
connection method of TX to RX, RX to TX, GNG to GND at Dupont ends of the
provided USB to TTL cable, connect to the specified TTL of the gimbal, and the
USB end of the cable connect to computer).
Install
the Seeker-40
software to test the functions directly. Users may choose
to develop their own software, please contact technical support for TTL
control protocol file.
Connect serial port of gimbal to pins, DO NOT connect with
power supply.
The default baud rate of serial port is 115200, which can be
changed according to the docking equipment.
Seeker-40 TIR Dual-Sensor AI Tracking Camera User Manual
@2022 FOXTECH All Rights Reserved 16
