16
"Browse Library" button to navigate to the correct location. When the appropriate
files are found, double-click on any of the sounds to automatically load all files from
that location.
4.
Select one, multiple, or all sound files in the "Source Sound Files" column. Click on the
position you wish to load the sounds into and click "Insert". Or if you are replacing
existing sounds, use "Overwrite".
5.
When complete, click on the "Update Caller" button to save your changes. Any sounds
being removed will automatically be backed-up.
6.
Exit the utility and update your remote control as per the instructions in the next
section.
7-3 Transferring a New Playlist to the TX9
Now that you are done programming your Hellfire, you are ready to download the new playlist
to the TX9 transmitter. You will need to obtain a 3.5mm male-to-male stereo patch cable for
this process.
1.
Disconnect all accessories from the Hellfire (i.e. speakers or decoy)
2.
Turn the power off on both the Hellfire and the TX9.
3.
Connect patch cable from the sound upload jack on the TX9 to the AUX jack on the
Hellfire.
4.
Turn on the TX9
5.
After being powered on, the TX9 display will say “TURN ON CALLER TO BEGIN
TRANSFER”
6.
Power on the Hellfire.
7.
The display on the TX9 will display “TRANSFERRING DATA PLEASE WAIT”. When it’s
done, the display will say “TRANSFER COMPLETE REMOVE CABLE”.
8.
Unplug the cable from the TX9 first, followed by the main unit. Your sound list will
appear on the screen. Cycle through the list to view your changes.
IMPORTANT NOTE
Always unplug the cable from the TX9 before the main unit. If you unplug the main
unit end first, this could result in the TX9 needing to be manually reset by
momentarily disconnecting the battery.
8.
Product Care & Maintenance
In order to help get years of trouble free service with your FOXPRO game call, it is strongly
recommended that you read and understand the following points. Many of these are
considered proactive or preventative.
Avoid exposure to all precipitation and moisture
. Whether you are storing your FOXPRO game
call or decoy away for the summer or just having some down time from calling, it is highly
recommended that you thoroughly inspect the unit for any signs of moisture. Moisture
(perhaps from rain, snow, condensation, or other) can potentially enter the unit or the battery
compartment and cause some serious problems. Proper care should be taken to mitigate the
introduction of (or potential for introduction of) moisture into the machine and make sure that
