13
Turning FOXBANG On and Off
1.
To turn FOXBANG on, simultaneously press the Sound Up and Down buttons on your
TX-9. Repeat this step to turn FOXBANG off.
IMPORTANT NOTE
NOTE:
When you activate FOXBANG it will automatically use the previous
sensitivity setting. The factory default sensitivity is medium. You may need to
adjust this in order to get the right setting for your firearm. If you are using a large
caliber (.30-06), you would want to select a lower sensitivity. If using a smaller
firearm (such as .17HMR or .22), use the higher sensitivity.
Medium settings should
be suitable for .17 Fireball, .223, .22-250, etc.
Selecting FOXBANG Sensitivity
1.
Press and hold Sound Up and Down on the TX-9 for 3 seconds.
2.
Use the Volume Up and Down buttons to select your desired sensitivity.
3.
Press the Send button to lock this setting in.
IMPORTANT NOTE
NOTE: An unintended and unavoidable consequence of adjusting the FOXBANG
sensitivity to high levels is that handling noises, such as banging of the transmitter
case on your firearm stock, may cause unexpected activation of FOXBANG. For this
reason, you should choose the lowest sensitivity that affords reliable activation
from the muzzle blast. FOXBANG is intended to work when the transmitter is
located within about 5 feet of the firearm muzzle.
6-4 Reverse Text Mode
For nighttime operation, there may be times where reversing the screen graphics can be to your
advantage. To accomplish this, simultaneously press the P1 and P2 buttons on your TX-9. To
switch back to normal, simply repeat the process.
6-5 Large Text Mode
If you have trouble reading the text on the screen, you can engage large text mode on the TX-9.
This will display the 3 digit sound ID number along with the 2 digit volume level in large text
only (nothing else will be displayed). To engage this, press Volume Up and Volume Down
simultaneously. To switch back to normal text mode, reverse this process.
