Foxpro HELLFIRE Instruction Manual Download Page 14

14 

7.

 

Programming the Hellfire 

Programming your Hellfire can be done from home with the use of a PC or Mac computer, or by 

sending the Hellfire to the factory. In order to program the Hellfire from home, you will need 

the following items: 

1.

 

USB A/B printer-style cable 

2.

 

Windows based PC running Windows XP, Windows Vista, Windows 7, or Windows 8. If 

using a Mac, make sure you are running Mac OS 10 or higher. 

 

For detailed programming guides, please visit the FOXPRO website. Mac users can find a very 

detailed instruction set at the following address: 

 

http://www.gofoxpro.com/site/resources/mac-programming 

 

All other programming guides can be found at the following address: 

 

http://www.gofoxpro.com/site/resources/programming-support 

 

The Hellfire features a USB port. The port is located inside of the speaker cap. To gain access to 

the USB port, you must remove the three screws from the back of the cap. Inside you will see 

the USB port. As mentioned previously, this will require a USB 2.0 printer-style cable. 

 

7-1 Getting New Sounds 

You can access the FOXPRO website at any time to purchase new sounds to program in your 
Hellfire. The website is located at: http://www.gofoxpro.com 
 
Once you are at the site, access the “FOXPRO Sounds” option from the main menu and click on 

one of the sound pack options. You can purchase 4 sounds of your choice, 8 sounds of your 

choice, and 16 sounds of your choice. Consult the programming link listed at the beginning of 

this section for more details on purchasing, downloading, and installing new sounds from the 

website. 

The Hellfire is also capable of playing MP3, and uncompressed WAV, files obtained from other 

sources. The maximum number of sounds that your Hellfire can hold at one time is 200. 

7-2 Programming the Hellfire (Windows PC’s) 

The first step is to download and install the FOXPRO Sound Programming Utility. The installer 
for the FOXPRO Sound Programming Utility can be downloaded directly from our website at any 
time by visiting the following web address:  
 

http://www.gofoxpro.com/programmer 

 

Summary of Contents for HELLFIRE





















Reviews: